-
Load and Unload Double Beam Gantry Crane
A gantry crane is a crane built atop a gantry, which is a structure used to straddle an object or workspace. They can range from enormous “full” gantry cranes, capable of lifting some of the heaviest loads in the world, to small shop cranes, used for tasks such as lifting automobile engines out of vehicles. They are also called portal cranes, the “portal” being the empty space straddled by the gantry.
Working load: 30t-75t
span:7.5-31.5m
Ex-extension distance :30-70m
Post-extension spacing :10-25m
-
L Type Strong Crab gantry crane (Trolley type)
1. L single main beam hook hoist gantry crane is mainly composed of gantry, crane crab, and trolley traveling mechanism, cab and electric control system.
2. The gantry is of a box-shape structure. The crab adopts vertical reaction wheel when the lifting load is below 20t, and horizontal reaction wheel when above 20t to run at the girder side.
3. The girder is of single-girder bias track and the leg is L-shaped, so that the lifting space is large and the spanning ability is strong, making it easy to covey articles from the span to under the jib.
4.The closed cab is employed for operation, where there are adjustable seat, insulating mat on the floor, toughened glass for the window, fire extinguisher, electric fan and auxiliary equipment such as air conditioner, acoustic alarm and interphone which can be furnished as required by users.
-
MH Type Single Girder Gantry Crane(Box Type)
MH type single girder gantry crane has box type and truss type, the former have good techniques and easy fabrication, the latter is light in dead weight and strong in wind resistance. For different usage, MH gantry crane also has cantilever and non cantilever gantry crane. If have cantilevers, the crane can load the goods to the crane edge through the supporting legs,which is very convenient and high efficiency.
The products meet the factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace, military and other industries of universal bridge crane, overhead crane, eot crane, universal gantry crane, rubber tyre and rail mounted container gantry crane four link type portal crane,grab bucket crane, jib crane,marine decke crane,electric hoist,electric winch,mobile platforms and other types of hydraulic crane technical requirements.
Capacity: 5~20 t
Span: 12~30 m
Lifting Height: 6 m, 9 m, 12 m -
L-Shaped Single Girder Gantry Crane (Hoist Type)
L-shaped electric hoist single girder gantry crane is a mid-light type gantry crane, normally equipped with an electric hoist, with the obvious features of “L” shape legs, which makes the crane more convenient for handling cargo with long length, such as, steel pipe, etc. The lifting capacity of the electric hoist single girder gantry crane is 5 to 16 ton and its work duty is A4.
Capacity: 5~20 t
Span: 12~24 m
Lifting Height: 6 m, 9 m, 12 m
-
MZ Type Double Beam Grab Gantry Crane
Capacity: 10t, 20/5t, 32/5t, 50/10t, or other
Lifting Height: 10m, 12m or other
Span: 18~35m, 18~26m, 26~35m, or other
Work Duty: A5 -
U Type Subway Turn Slag Hook Gantry Crane
MG type double girder gantry crane composed of gantry, crane crab, trolley traveling mechanism, cab and electric control system, the gantry is box-shape structure, the track is at the side of each girder and the leg is divided into type A and type U according to user’s requirements. The control method could be ground control, remote control, cabin control or both, in the cab there are adjustable seat, insulating mat on the floor, toughened glass for the window, fire extinguisher, electric fan and auxiliary equipment such as air condition, acoustic alarm and interphone which can be furnished as required by users. This double girder gantry crane is beautiful design and durable and widely used in open-air warehouse, of course, also can be used indoors.
Working load: 20t-75t
span:5.5-45m
lifting height:5-16.5m -
MH Type Single Girder Gantry Crane(Trussed Type)
MH type single girder gantry crane has box type and truss type, the former have good techniques and easy fabrication, the latter is light in dead weight and strong in wind resistance. For different usage, MH gantry crane also has cantilever and non cantilever gantry crane. If have cantilevers, the crane can load the goods to the crane edge through the supporting legs,which is very convenient and high efficiency.
Capacity: 5~20 t
Span: 12~30 m
Lifting Height: 6 m, 9m, 12 m
-
A Type Double Beam Gantry Crane A
MG type double girder gantry crane composed of gantry, crane crab, trolley traveling mechanism, cab and electric control system, the gantry is box-shape structure, the track is at the side of each girder and the leg is divided into type A and type U according to user’s requirements. The control method could be ground control, remote control, cabin control or both, in the cab there are adjustable seat, insulating mat on the floor, toughened glass for the window, fire extinguisher, electric fan and auxiliary equipment such as air condition, acoustic alarm and interphone which can be furnished as required by users. This double girder gantry crane is beautiful design and durable and widely used in open-air warehouse, of course, also can be used indoors.
Capacity: 5~800 t
Span: 18~35 m
Lifting Height: 6~30 m
-
U Type Double Beam Gantry Crane
U type double girder gantry crane is applied to general materials handing service in outdoor freight yard and along railway line , such as loading,unloading ,lifting and transferring work .As there is more space under legs of gantry crane , it’s fit for conveying larger products ,saddle support isn’t needed for U type gantry crane , So overall height of crane is reduced given certain lift height.
Product name:U Type Double Beam Gantry Crane U
Working load: 10t-80t
span:7.5-50m
lifting height:4-40m
